Safety Consultant | Safety Audit and Safety Training and Engineering Services Gold Coast and Australia

Manual Handling and Ergonomics Training 21st August 2025
2025-08-21 08:00 - 12:00 (Australia/Brisbane)
Manual Handling and Ergonomics Training
This Manual Handling and Ergonomics Training is designed for workers and supervisors to recognise issues associated with body movements performing tasks in the workplace. Manual handling tasks are used frequently in all workplaces. WHS Legislation defines the importance of ensuring workers are part of a safe workplace with safe systems of work.
These tasks can be completed and not cause long term physical issues in workers however when any of the following occur there can be musculoskeletal disorders resulting in reduced capacity to work.

Large forces/impacts
Vibration
Repetition
Sustained forces/positions
Awkward positioning
Sudden movements
Twisting

These tasks are called hazardous manual tasks are the most common source of workplace injuries. Businesses can manage these risks through using equipment to assist with the task and through adequate training. Injuries can occur from a large variety of different activities and can potentially result in long-term, expensive, and messy implications between employees and the business.
Participants will understand the instances when a task may introduce one of these factors that increase the risk and assist in redesigning the task to eliminate or reduce the risk.
NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
For more information on this training please contact us or peruse the other training courses on offer.

Incident Investigation Training 20th August 2025
2025-08-20 08:00 - 12:00
Incident Investigation Training
This training is designed for those who will manage or perform investigations into incidents in the workplace. Though not a specific requirement in the WHS Legislation this is the monitoring and review steps as part of the risk management process.
Train your team or department and build internal capability to uncover wrongdoing and react quickly and decisively. We enable your selected resources to follow best practice investigation processes and procedures. This training can be customised based on the expertise of the participants and built on their foundational knowledge on conducting investigations.
Participants will be trained in

Basic investigation techniques and the process of conducting efficient workplace investigations
The importance of a fair workplace
Following policies and procedures when conducting investigations
Planning and conducting incident investigations
Effective results communication and preparing reports

NOTE: Private courses for Incident Investigation can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
For more information on this training please contact us or peruse the other training courses on offer.

Confined Space Awareness Training 19th August 2025
2025-08-19 08:00 - 12:00
Confined Space Awareness
This is a Confined Space Awareness course to cover the training aspects for the ‘relevant worker’ under the WHS Legislation.
This course is not intended to be all encompassing for complex confined space entries but to provide suitable and adequate information, training and instruction in relation to the following
(a) the nature of all hazards relating to a confined space;
(b) the need for, and the appropriate use of, control measures to control risks to health and safety associated with those hazards;
(c) the selection, fit, use, wearing, testing, storage and maintenance of any personal protective equipment;
(d) the contents of any confined space entry permit that may be issued in relation to work carried out by the worker in a confined space;
(e) emergency procedures.
Designed for people to gain an understanding of what confined spaces are and the obligations required of employers to manage work that is conducted in or around confined spaces.
NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
We offer a range of health and safety courses, including training in Confined Spaces and WHS consultancy services.
For more information on this Confined Space Awareness training please contact us or peruse the other training courses on offer.

Fire Warden and Chief Warden Training 13th August 2025
2025-08-13 08:00 - 12:00
Fire Warden and Chief Warden
This short course for Fire Warden and Chief Warden training builds on the National Competencies providing practical information instruction and training for

PUAFER005 – Operate as part of an emergency control organisation
PUAFER006 – Lead an Emergency Control Organisation

This course is to provide participants with the knowledge, training, and practical skills to effectively perform the role and responsibilities of workplace fire warden. The training is suitable for businesses who need staff to be trained as wardens to provide participants with the knowledge and skills to effectively manage facility emergencies. This is a compliance requirement in Queensland under the Building Fire Safety Regulation.
At the completion of this training the participants will

learn how to respond to a fire or other incident, raise the alarm and evacuate the facility occupants quickly and safely.
understand the leadership skills required to act in the role of Chief Warden during an emergency requiring a coordinated response, including fire.

Course Outline
The key areas covered by this course include:

Preparing for workplace emergencies
Communicating, controlling, and coordinating workplace emergency procedures
Controlling the response to emergency reports, signals, and warnings
Coordinating reports and results of the initial emergency response
Concluding an incident

NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
For more information on this training please call us 07 5573 6199, contact us or peruse the other training courses on offer.
We have more information relating to the Fire Safety Adviser (full), Fire Safety Adviser (refresher) and First Response Fire Training for you to peruse if required.

Health and Safety Representative Training 4th August 2025 – WHSQ Approved
2025-08-04 08:00 - 2025-08-08 17:00
Health and Safety Representative Training
This Health and Safety Representative training course provides participants with the knowledge and skills necessary to fulfil their role as a Health and Safety Representative (HSR) in Queensland. DRA is a WorkSafe Queensland approved provider of this course, which is compliant under the Work Health and Safety Regulation 2011 (Qld).
HSRs in Queensland are entitled to attend this WorkSafe Queensland approved five-day training course within three months of being elected as the HSR. Employers are required to allow the HSR to take paid time off work to attend this training and pay for training costs.
Likewise, HSRs are also entitled to attend the one-day Health and Safety Representative training refresher courses at least every three years after the initial five-day course has been completed (as per the Work Health and Safety legislation).
This Health and Safety Representative training aims to provide HSRs and deputy HSRs, with information and skills relating to:

Interpreting the WH&S legislative framework and its relationship to the HSR
Identifying key parties and their legislative obligations and duties
Establishing representation in the workplace
Participating in consultation and issue resolution
Representing members in the WHS risk management process undertaken by the PCBU
Issuing a Provisional Notice (PIN) and directing the Cessation of Work.

This Health and Safety Representative training course covers training required of a student in their role as an elected HSR. Training consists of written answers and practical exercises in the following:

undertake workplace inspections
review the circumstances of workplace incidents
accompany a WHSQ inspector during an inspection
represent the work group in health and safety matters
attend an interview about health and safety matters with a worker from the work group (with the consent of the worker)
request that a health and safety committee be established
participate in a health and safety committee
monitor compliance measures
investigate work health and safety complaints from work group members
inquire into any risk to the health and safety of workers in the work group
issue provisional improvement notices and direct a worker to cease unsafe work (where the HSR has completed the approved training).

The role of a HSR is generally limited to their own work group unless:

there is a serious risk to health or safety (created by an immediate hazard) affecting workers from another work group
a worker in another work group asks for the HSR’s assistance, and the HSR for that other work group is found to be unavailable.

NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
This topic has been discussed on our Blog page.
Information on this training is provided in more detail at the Health and Safety Representative Initial 5-Day Training page.
For more information on this training please contact us or peruse the other training courses on offer.

Asbestos Awareness Training 17th July 2025
2025-07-17 08:00 - 12:00
Asbestos Awareness Training
This Asbestos Awareness training is a short course designed for workers and managers who need an understanding of dealing with asbestos in the workplace.
For Workers:
– That may encounter asbestos or asbestos containing materials in their workplace
– To ensure that they remain safe while on-site
– Wanting to ensure their skills and knowledge are current and up to date with the latest industry standards
For Businesses:
– Needing to ensure staff who may come in contact with asbestos or asbestos containing materials in their normal course of work are appropriately trained as required by the WHS Legislation.
At the completion of this course the participants will be able to:
– Understand the risks posed by asbestos
– Identify potential sources of asbestos in the workplace
– Understand the WHS legislation requirements regarding asbestos management in the workplace, including availability of an asbestos register
– Work safely in areas where asbestos and ACM are present
NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
We have more information relating to Asbestos Awareness Training, Asbestos Awareness and History of Asbestos for you to peruse if required.
For more information on this training please contact us or peruse the other training courses on offer.

Fire Safety Adviser Refresher (FSA) – 1 Day 14th July 2025
2025-07-14 08:00 - 17:00
Fire Safety Adviser Refresher Training
The Fire Safety Adviser is a person who holds an approved building fire safety qualification, issued within the last three years. Approved building fire safety courses are made up of eight units of competency in Workplace Emergency Response within the Australian Quality Training Framework.
The Building Fire Safety Regulation 2008 was introduced on 1 July 2008. The most significant reform in the regulation is the requirement for occupiers of high occupancy buildings, as defined under the regulation, to appoint and train a Fire Safety Adviser.
This one day Fire Safety Adviser refresher courses reviews the following eight units of competency in Workplace Emergency Response within the Australian Quality Training Framework. The training topics covered in this one day training cover:
– Identify, prevent and report potential workplace emergency situations
– Ensure workplace emergency prevention procedures, systems and processes are implemented
– Manage and monitor workplace emergency, procedures, equipment and other resources
– Respond to workplace emergencies
– Operate as part of an emergency control organisation
– Lead an emergency control organisation
– Manage an emergency control organisation, and
– Confine small workplace emergencies.
NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
We have more information relating to the Fire Safety Adviser (full), Fire Safety Adviser (refresher) and First Response Fire Training for you to peruse if required.
For more information on this training please contact us or peruse the other training courses on offer.

Health and Safety Representative Training 26th May 2025 – WHSQ Approved
2025-05-26 08:00 - 2025-05-30 17:00

Fire Warden and Chief Warden Training 8th May 2025
2025-05-08 08:00 - 12:00

Fire Safety Adviser (FSA) 23rd April 2025
2025-04-23 08:00 - 2025-04-24 17:00
Fire Safety Adviser Training
A Fire Safety Adviser is a person who holds an approved building fire safety qualification, issued within the last three years. Approved building fire safety courses are made up of eight units of competency in Workplace Emergency Response within the Australian Quality Training Framework.
The Building Fire Safety Regulation 2008 was introduced on 1 July 2008. The most significant reform in the regulation is the requirement for occupiers of high occupancy buildings, as defined under the regulation, to appoint and train a Fire Safety Adviser.
This two day Fire Safety Adviser courses is made up of the following eight units of competency in Workplace Emergency Response within the Australian Quality Training Framework. The training topics cover:
– Identify, prevent and report potential workplace emergency situations
– Ensure workplace emergency prevention procedures, systems and processes are implemented
– Manage and monitor workplace emergency, procedures, equipment and other resources
– Respond to workplace emergencies
– Operate as part of an emergency control organisation
– Lead an emergency control organisation
– Manage an emergency control organisation, and
– Confine small workplace emergencies.
NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
Information on this training is provided in more detail at the Fire Safety Adviser Full 2-Days Training page. We also offer a range of other health and safety courses including the Fire Safety Adviser Refresher training and WHS consultancy services.
For more information on this training please contact us or peruse the other training courses on offer.

Manual Handling and Ergonomics Training 21st April 2025
2025-04-21 08:00 - 12:00

Confined Space Awareness Training 17th April 2025
2025-04-17 08:00 - 12:00

Health and Safety Representative Refresher Training 15th April 2025 – WHSQ Approved
2025-04-15 08:00 - 17:00
Health and Safety Representative Refresher Training
This Health and Safety Representative Refresher course is to update participants with the knowledge and skills necessary to fulfil their role as a Health and Safety Representative (HSR) in Queensland. DRA is a WorkSafe Queensland approved provider of this course, which is compliant under the Work Health and Safety Regulation 2011 (Qld).
HSRs in Queensland are entitled to attend this WorkSafe Queensland approved one day training course every three years of the initial 5-day training course. Employers are required to allow the HSR to take paid time off work to attend this training and pay for training costs.
From 1 February 2019, all HSRs must undertake the relevant approved training course within three months of their election unless a training course is not reasonably available within this period. Existing HSRs, who have not already completed the training, must complete the training within the required period. If a worker chooses not to undertake the training within the time period, they will no longer be eligible to fulfil the role of HSR and will need to be replaced.
HSRs and deputy HSRs can ask a person conducting a business or undertaking (PCBU) to attend approved courses.
The PCBU must give HSRs paid time off to attend the Health and Safety Representative Refresher Training course and pay the course costs and reasonable expenses, within three months of the request.
This Health and Safety Representative Refresher training course covers training required of a student in their role as an elected HSR. Training consists of written answers and practical exercises in the following:

undertake workplace inspections
review the circumstances of workplace incidents
accompany a WHSQ inspector during an inspection
represent the work group in health and safety matters
attend an interview about health and safety matters with a worker from the work group (with the consent of the worker)
request that a health and safety committee be established
participate in a health and safety committee
monitor compliance measures
investigate work health and safety complaints from work group members
inquire into any risk to the health and safety of workers in the work group
issue provisional improvement notices and direct a worker to cease unsafe work (where the HSR has completed the approved training).

The role of a HSR is generally limited to their own work group unless:

there is a serious risk to health or safety (created by an immediate hazard) affecting workers from another work group
a worker in another work group asks for the HSR’s assistance, and the HSR for that other work group is found to be unavailable.

A HSR can only issue a provisional improvement notice (PIN) if they have attended an approved training course.
This course aims to provide HSRs and deputy HSRs, with information and skills relating to:

Interpreting the WH&S legislative framework and its relationship to the HSR
Identifying key parties and their legislative obligations and duties
Establishing representation in the workplace
Participating in consultation and issue resolution
Representing members in the WHS risk management process undertaken by the PCBU
Issuing a Provisional Notice (PIN) and directing the Cessation of Work.

Training courses approved under section 21 of the Work Health and Safety Regulation 2011, are:
– an initial five-day training course
– a one day Health and Safety Representative Refresher course at least every three years. The entitlement to the Health and Safety Representative Refresher Training begins three years after the initial training.
For more information call us 07 5573 6199 or email us at info@drasafety.com.au, alternatively peruse the other training courses on offer.
For more information on this Health and Safety Representative Refresher Training please contact us or peruse the other training courses on offer.

Lockout Tagout Isolation Training 25th March 2025
2025-03-25 08:00 - 12:00
Lockout Tagout Training
This includes information to safely perform tasks such as maintenance, repair, installation and cleaning of Plant (equipment). This is including any work processes requiring the isolation of the energy sources including electricity, pressurised fluids or gases, stored energy systems, gravity and radiation (lasers). Further information is available in the SafeWork Australia Code of Practice for Plant.
A robust isolation system provides protection for everyone in the workplace. This course provides the participants with the knowledge and understanding of locks and tags used within the workplace, including;

Importance of locking out plant and equipment
Consequences of failing to lockout plant and equipment
Basic principle of lockout procedures
Correct location for lockouts
Appropriate isolation and lockout devices
Methods of lockout
Importance of correct procedures

NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
For more information on this training please contact us or peruse the other training courses on offer.

Hazardous Chemical Awareness Training 20th March 2025
2025-03-20 08:00 - 12:00
Hazardous Chemical Awareness Training
This short course on Hazardous Chemical Awareness is to provide participants with the skills and knowledge to work with chemicals effectively and safely in the workplace.
Participants will be provided information and instruction in how to identify the risks associated with chemicals in the workplace using the information from the Safety Data Sheet (SDS), Label and other approved sources.
Though the legislation is discussed, this is more of a practical course explaining the various aspects of the SDS and guidance material available.
This course includes

basic toxicology and how it is used to determine exposure limits
the Globally Harmonised System (GHS) for the classification of hazardous chemicals
legislative requirements relating to storage, handling and use of hazardous chemicals.
selection, use, fit, maintenance and storage of personal protective equipment
limitations of personal protective equipment

NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
We have more information relating to Hazardous Chemicals Management, Globally Harmonized System of Classification and Labelling of Chemicals and processes for Good Hazardous Chemicals Management for you to peruse if required.
For more information on this training please contact us or peruse the other training courses on offer.

Health and Safety Representative Training 10th March 2025 – WHSQ Approved
2025-03-10 08:00 - 2025-03-14 17:00

Health and Safety Representative Refresher Training 26th February 2025 – WHSQ Approved
2025-02-26 08:00 - 17:00

Fire Safety Adviser Refresher (FSA) – 1 Day 24th February 2025
2025-02-24 08:00 - 17:00

Risk Management training 19th February 2025
2025-02-19 08:00 - 12:00
Risk Management Training
This Risk Management Training is designed to provide workers with the necessary skills and knowledge required to conduct effective risk assessments and Job Safety Analysis (JSA). This is the entry level risk training course designed to assist workers understand how to identify hazards, assess risks, select, implement and monitor effective controls and contribute to the development of risk assessment documentation including Job Safety Analysis / Safe Work Method Statements etc.
Risk Management Training will assist with the skills and knowledge required to contribute to WHS risk management. This includes the processes for identifying work health and safety (WHS) hazards and assessing and controlling the risk relating to those identified hazards. It involves contributing to the development, implementation and evaluation of risk controls according to legislative and organisational requirements.
Participants will learn the risk assessment process. Our training can be very workplace specific and we can look at your risk assessment processes and the hazards that are specific to your workplace. We can use your processes and Job Safety Analysis documents. The training covers different methods of risk controls and the various consequences and categories of risk. The training focuses on the standard WHS practices as adopted from SafeWork Australia.
During the course we will complete practical risk assessments and look at different methods for risk elimination and risk control. We will complete many of the practical tasks in a group environment on actual work tasks that the workers undertake.
This course is designed to help workers to understand how they can contribute to risk management in the workplace and how they are responsible for minimizing that risk.
This topic has been discussed on our Blog page.
NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
We also offer a range of other health and safety courses including Risk Management training for Managers and Supervisors and WHS consultancy services.
For more information on this training please contact us or peruse the other training courses on offer.

Incident Investigation Training for workers 17th February 2025
2025-02-17 08:00 - 12:00

Asbestos Awareness Training 28th January 2025
2025-01-28 08:00 - 12:00

Health and Safety Representative Training 20th January 2025 – WHSQ Approved
2025-01-20 08:00 - 2025-01-24 17:00

Risk Management training 10th October 2024
2024-10-10 08:00 - 12:00

Managing Work Related Psychological Health and Safety 3rd October 2024
2024-10-03 08:00 - 12:00
Managing Work Related Psychological Health and Safety
Training provides a systematic practical approach to identifying and managing work-related mental health issues. This is part of the Work Health and Safety legislation to provide safe workplaces systems for persons health including psychological health.
This training highlights poor psychological work health and safety that can lead to both psychological and physical injuries. Developing and using a robust system can assist business processes to reduce business disruption and costs from work-related mental health issues. This will have a flow on effect of improving worker engagement and job satisfaction.
The training is designed to give participants a basic understanding of how to support someone who is experiencing mental health concerns. It is the ideal platform to begin mental health training.
Participants will learn how to design safe workplaces and how to integrate mental health into all areas of a business, including,

legal responsibilities of the employer
strategies to support mental health at work and how to embed them into your business
how to design healthier workplaces, procedures, job roles and responsibilities

NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
This topic has been discussed on our Blog page.
For more information on this training please contact us or peruse the other training courses on offer.

WHSO – Work Health and Safety Officer Training – Elective 1st October 2024 – WHSQ Approved
2024-10-01 08:00 - 17:00
WHSO – Work Health and Safety Officer Training
The Work Health and Safety Officer Training comes from the Work Health and Safety (WHS) Act 2011. This training is provided to assist to reduce the serious economic and social impact on individuals, businesses, and the Australian community of work-related incidents.
DRA have been providing this health and safety officer training for over 30 years. Originally businesses were required develop their own training course for approval. When the Legislation changed and the WHSO training was removed, we moved the training course we developed to the AIHS and registered it as a National accredited training course. We continued to deliver this course now called WHS Advisor – 10312NAT.
Then as the legislation changed again and the training was reintroduced, we assisted in transferring the various elements from the 10312NAT to WHS QLD to become the WHSO training you see today. The trainers have been delivering this course are experienced and qualified and approved to deliver this training on behalf of Workplace Health and Safety Queensland.
We are a Safety Company delivering a Safety Course, we have a vested interest in this training course and do not permit any person apart from our qualified consultants to deliver this training.
Training Content
This training is focused on providing participants with the information and skills that will assist them in their role and functions under the WHS legislation including:
– An understanding of the WHS legislation;
– An understanding of how it applies to their role; and
– The knowledge and skills necessary assist employers to meet their obligations under the WHS legislation.
Persons appointed as a Health and Safety Officer by the business is required to undertake this training and receive a Certificate of Authority issued on behalf of Workplace Health and Safety Queensland or have an equivalent qualification.
This topic has been discussed on our Blog page.
We also offer a range of other health and safety courses including the Full WHSO 5-Day training course; the WHSO Elective and WHS consultancy services.
For more information on this training please contact us or peruse the other training courses on offer.

Hazardous Chemical Awareness Training 13th September 2024
2024-09-13 08:00 - 12:00
Hazardous Chemical Awareness
This short course on Hazardous Chemical Awareness is to provide participants with the skills and knowledge to work with chemicals effectively and safely in the workplace.
Participants will be provided information and instruction in how to identify the risks associated with chemicals in the workplace using the information from the Safety Data Sheet (SDS), Label and other approved sources.
Though the legislation is discussed, this is more of a practical course explaining the various aspects of the SDS and guidance material available.
This course includes

basic toxicology and how it is used to determine exposure limits
the Globally Harmonised System for the classification of hazardous chemicals
legislative requirements relating to storage, handling and use of hazardous chemicals.
selection, use, fit, maintenance and storage of personal protective equipment
limitations of personal protective equipment

NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
We have more information relating to Hazardous Chemicals Management, Globally Harmonized System of Classification and Labelling of Chemicals and processes for Good Hazardous Chemicals Management for you to peruse if required.
For more information on this training please contact us or peruse the other training courses on offer.

Lockout Tagout Isolation Training 12th September 2024
2024-09-12 08:00 - 12:00

Fire Safety Adviser (FSA) 9th September 2024
2024-09-09 08:00 - 2024-09-10 17:00

WHSO Work Health and Safety Officer Core Training 2nd September 2024 – WHSQ Approved
2024-09-02 08:00 - 2024-09-06 17:00
WHSO – Work Health and Safety Officer Training
The Work Health and Safety Officer (WHSO) Training comes from the Work Health and Safety (WHS) Act 2011. This training is provided to assist to reduce the serious economic and social impact on individuals, businesses and the Australian community of work-related incidents.
DRA have been providing the this Safety Officer training for over 30 years. Originally businesses were required develop their own training course for approval. When the Legislation changed and the WHSO training was removed, we moved the training course we developed to the AIHS and registered it as a National accredited training course. We continued to deliver this course now called WHS Advisor – 10312NAT.
Then as the legislation changed again and the training was reintroduced, we assisted in transferring the various elements from the 10312NAT to WHS QLD to become the WHSO training you see today. The trainers have been delivering this course are experienced and qualified and approved to deliver this training on behalf of Workplace Health and Safety Queensland.
We are a Safety Company delivering a Safety Course, we have a vested interest in this training course and do not permit any person apart from our qualified consultants to deliver this training.
Work Health and Safety Officer Training Content
Work Health and Safety Officer training is focused on providing participants with the information and skills that will assist them in their role and functions under the WHS legislation including:
– An understanding of the WHS legislation;
– An understanding of how it applies to their role; and
– The knowledge and skills necessary assist employers to meet their obligations under the WHS legislation.
Persons appointed as a WHSO by the business is required to undertake this training and receive a Certificate of Authority issued on behalf of Workplace Health and Safety Queensland or have an equivalent qualification.
A Work Health and Safety Officer functions are to:
• notify the PCBU about work health and safety matters
• identify hazards and risks to health and safety arising from the work
• report in writing to the PCBU any hazards and risks identified arising from the work
• immediately notify the PCBU about:
– any incident the WHSO is aware has occurred at the business or undertaking; or
– any immediate or imminent risk to health and safety at the business or undertaking
• investigate, or assist in the investigation of, any incidents that occurred at the business or undertaking
• accompany and assist an inspector during an inspection of the business or undertaking
• establish educational and training programs on matters relating to work health and safety.
NOTE: Private courses can be customised and tailored by experienced and qualified Safety Consultants to suit your company needs (additional charges may apply).
We also offer a range of other health and safety courses including the Full WHSO 5-Day training course; the WHSO Elective and WHS consultancy services.
For more information on this Work Health and Safety Officer training please contact us or peruse the other training courses on offer.

Manual Handling and Ergonomics Training 21st August 2024
2024-08-21 08:00 - 12:00
